周明东

【期刊论文】 ( * 通讯作者)
1. Yupei Tian, Huilin Ren, Jian He, Xinmeng Zha, Kaijie Lin, Mingdong Zhou,Yi Xiong*, Surface roughness improvement of Ti-6Al-4V alloy overhang structures via process optimization for laser-powder bed fusion, Journal of Manufacturing Processes, 110, 434-446, 2024.

2. Yichang Liu, Xiaoyu Huang, Yi Xiong, Mingdong Zhou*, Zhongqin Lin，Concurrent topology optimization of parts and their supports for additive manufacturing with thermal deformation constraint, Computers and Structures, 289, 1071462023, 2023.

3. Yufan Lu, Hongjiang Mao, Mingdong Zhou*, Topology optimization of electric vehicle chassis structure with distributed load-bearing batteries, Structural and Multidisciplinary Optimization, 66(6), 134, 2023.

4. Yichang Liu, Zhanglong Lai, Yufan Lu, Mingdong Zhou*, Zhongqin Lin, Topology optimization of shell-infill structures considering buckling constraint, Computers and Structures, 283, 107055, 2023.

5. Da Geng, Mingdong Zhou*, Hydraulic pressure control in topology optimization of cooling channels with Darcy flow model, 66(6), 128, 2023.

6. Yadong Wu, Yufan Lu, Hongjiang Yang, Yichang Liu, Mingdong Zhou*, Multidisciplinary Structural Optimization of Low-Pyroshock Separation Nuts for Aerospace, Journal of Spacecraft and Rockets, 60(2), 508-519, 2023.

7. 王辰, 刘义畅, 陆宇帆, 赖章龙, 周明东*, 考虑增材制造填充结构强度的拓扑优化方法, 上海交通大学学报, 2023.

8. 刘宽, 奚小冰, 周明东*. 基于自适应多尺度图卷积网络的骨架动作识别, 计算机工程, 2023.

9. Mingdong Zhou*, Yufan Lu, Yichang Liu, Zhongqin Lin, Concurrent Topology Optimization of Shells with Self-supporting Infills for Additive Manufacturing, Computer Methods in Applied Mechanics and Engineering, 390, 114430, 2022.

10. Da Geng, Mingdong Zhou*, Concurrent Topology Optimization of Multi-scale Cooling Channels with Inlets and Outlets. Structural and Multidisciplinary Optimization, 65:234, 2022.

11. Haojie lian, Leilei Chen, Xiao Lin, Wenchang Zhao*, Stephane P.A. Bordas, Mingdong Zhou*, Noise Pollution Reduction through a Novel Optimization Procedure in Passive Control Methods, Computer Modeling in Engineering and Sciences, Vol.131, No.1, pp. 1-18, 2022.
(This Research Article was selected as the Cover Image of Computer Modeling in Engineering and Sciences in Vol.131, No.1, 2022.）

12. Mingdong Zhou*, Da Geng, Multi-scale and Multi-material Topology Optimization of Channel-cooling Cellular Structures for Thermomechanical Behaviors, Computer Methods in Applied Mechanics and Engineering, 383, 113896, 2021.

13. Yichang Liu, Mingdong Zhou*, Chuang Wei, Zhongqin Lin, Topology optimization of self-supporting infill structures, Structural and Multidisciplinary Optimization, 63, 2289–2304, 2021.

14. Qingping Ma, Lei Zhang, Junhao Ding, Shuo Qu, Jin Fu, Mingdong Zhou, Mingwang Fu, Xu Song, Michael Yu Wang*, Elastically-isotropic open-cell minimal surface shell lattices with superior stiffness via variable thickness design, Additive Manufacturing, 47, 102293, 2021.

15. 方喆，耿达，周明东*， 基于子结构凝聚的多层级拓扑优化设计理论与应用，机械设计与研究，第37卷第1期，1006-2343（2021）01-001-05，2021.

16. 丁卯，耿达，周明东*，来新民， 基于变密度法的结构强度拓扑优化策略研究，上海交通大学学报, 2021, 55(6): 764-773.

17. Mingdong Zhou* , Yichang Liu, Chuang Wei, Topology optimization of easy-removal support structures for additive manufacturing, Structural and Multidisciplinary Optimization, 61, 2423–2435, 2020.

18. Yelin Song, Qingping Ma, Yu He, Mingdong Zhou*, Michael Yu Wang, Stress-based shape and topology optimization with cellular level set in B-splines, Structural and Multidisciplinary Optimization, 62(5), 2391-2407, 2020.

19. Mingdong Zhou* , Yichang Liu, Zhongqin Lin, Topology Optimization of Thermal Conductive Support Structures for Laser Additive Manufacturing, Computer Methods in Applied Mechanics and Engineering, V. 353, 24-43 , 2019.

20. Xi Zhao, Mingdong Zhou*, Yichang Liu, Mao Ding, Ping Hu, Ping Zhu, Topology optimization of channel cooling structures considering thermomechanical behavior, Structural and Multidisciplinary Optimization, 59(2), 613-632, 2019.

21. Michael Yu Wang* , Hongming Zong , Qingping Ma , Ye Tian , Mingdong Zhou, Cellular Level Set in B-Splines (CLIBS): A Method for Modeling and Topology Optimization of Cellular Structures, Computer Methods in Applied Mechanics and Engineering, V. 349, 378-404, 2019.

22. Hongming Zong*, Hui Liu, Qingping Ma, Ye Tian, Mingdong Zhou, Michael Yu Wang, VCUT Level Set Method for Topology Optimization of Functionally Graded Cellular Structures, Computer Methods in Applied Mechanics and Engineering, V. 354, 487-505, 2019.

23. Wei Yan, Mao Ding, Xiaobing Xi, Mingdong Zhou*, Lightweight Splint Design for Individualized Treatment of Distal Radius Fracture, Journal of Medical Systems, 43:284, 2019.

24. Zhinan Zhang, Mingdong Zhou*, Weimin Ding, Huifang Ma, New analysis model for rotor-bearing systems based on plate theory. Front. Mech. Eng., 14(4): 461-473, 2019.

25. 赵曦，刘义畅，方喆，胡平，周明东*. 水冷模具离散结构拓扑优化. 计算力学学报, (05): 597-602, 2019.

26. Mingdong Zhou*, Haojie Lian, Ole Sigmund, Niels Aage, Shape morphing and topology optimization of fluid channels by explicit boundary tracking, International Journal of Numerical Methods in Fluids, Vol. 88, No. 6, 2018, p. 296-313，2018.
（This Research Article was selected as the Cover Image of International Journal of Numerical Methods in Fluids in Volume 88 Issue 6.）

27. Xi Zhao, Mingdong Zhou*, Ole Sigmund, Casper Schousboe Andreasen, A "poor man's approach" to topology optimization of cooling channels based on a Darcy flow model, International Journal of Heat and Mass Transfer, 116, 1108-1123，2018.

28. Christian Lundgaard*, Joe Alexandersen, Mingdong Zhou, Casper Schousboe Andreasen, Ole Sigmund, Revisiting density-based topology optimization for fluid-structure-interaction problems, Structural and Multidisciplinary Optimization, Volume 58, Issue 3, pp 969–995, 2018.

29. Mingdong Zhou and Ole Sigmund*. On fully stressed design and P-norm measures in structural optimization, Structural and Multidisciplinary Optimization, 56(3), 731–736, 2017.

30. Mingdong Zhou*, Boyan S. Lazarov and Ole Sigmund. Topology optimization for optical microlithography with partially coherent illumination, International Journal for Numerical Method in Engineering, 109, 631-647, 2017.

31. Mingdong Zhou*, Joe Alexandersen, Ole Sigmund and Claus B. W. Pedersen. Industrial application of topology optimization for combined conductive and convective heat transfer problems, Structural and Multidisciplinary Optimization, 54(4), 1045-1060, 2016.

32. Mingdong Zhou*, Boyan S. Lazarov, Fengwen Wang and Ole Sigmund. Minimum length scale in topology optimization by geometric constraints. Computer Methods in Applied Mechanics and Engineering, 293, 266-282, 2015.
(From ISI Web of Science: As of November/December 2016, this highly cited paper received enough citations to place it in the top 1% of the academic field of Computer Science based on a highly cited threshold for the field and publication year.)

33. Yangjun Luo*, Michael Yu Wang, Mingdong Zhou, and Zichen Deng. Topology optimization of reinforced concrete structures considering control of shrinkage and strength failure. Computers & Structures, 157, 31-41, 2015.

34. Yangjun Luo*, Xiaoxiang Wu, Mingdong Zhou, Michael Yu Wang. Simultaneous parameter and tolerance optimization of structures via probability-interval mixed reliability model. Structural Multidisciplinary Optimization, 51, (3), 705-719, 2015.

35. Mingdong Zhou*, Boyan S. Lazarov and Ole Sigmund. Topology optimization for optical projection lithography with manufacturing uncertainties. Applied Optics, 53(12), 2720-9, 2014.

36. Yangjun Luo*, Mingdong Zhou, Michael Yu Wang, and Zichen Deng. Reliability based topology optimization for continuum structures with local failure constraints. Computers & Structures, 143, 73-84, 2014.

37. Mingdong Zhou* and Michael Yu Wang. Engineering feature design for level set based structural optimization. Computer Aided Design, 45(12), 1524-1537, 2013.

38. Hon Shan Ho, Michael Yu Wang*, and Mingdong Zhou. Parametric structural optimization with dynamic knots RBFs and partition of unity method. Structural Multidisciplinary Optimization, 47(3), 353-365, 2013.

39. Mingdong Zhou* and Michael Yu Wang. A Semi-Lagrangian level set method for structural optimization. Structural Multidisciplinary Optimization, 46(4), 487-501, 2012.

40. Mingdong Zhou* and Michael Yu Wang. Engineered model simplification for simulation based structural design. Computers-Aided Design & Applications, 9(1), 87-94, 2012.

41. Yangjun Luo*, Michael Yu Wang, Mingdong Zhou, and Zichen Deng. Optimal topology design of steel-concrete composite structures under stiffness and strength constraints. Journal of Computers & Structures, 112-113:433-444, 2012.

42. 周明东, 林俊聪, 金小刚*, 基于最小二乘网格的模型修补,《图学学报》, 30(5), 13-21, 2009。

43. Jiayi Xu, Xiaogang Jin*, Yizhou Yu, Tian Shen, Mingdong Zhou, Shape‐constrained flock animation， Computer Animation and Virtual Worlds 19 (3‐4), 319-330, 2008.


【会议论文】(报告、摘要）
[Invited Speech] TOPOLOGY OPTIMIZATION OF CHANNEL-COOLING STRUCTURES FOR THERMOMECHANICAL BEHAVIORS, IUTAM Symposium on Ultralarge-scale Topology Optimization Copenhagen, 23-26 April, 2023.

[Invited Speech] Topology optimization of self-supporting infill structures, 14th TOP Webinar, 26th August, 2021 (online vedio: https://youtu.be/68hLQgRjANo)


Da Geng, Mingdong Zhou, Topology Optimization of Channel-Cooling Cellular Structures for Thermomechanical Behaviors. Advances in Mechanical Design, 111:2421-2436, 2022. Procedings of the 2021 International Conference on Mechanical Desiqn ICMD 2021

周明东, 面向增材制造的壳-填充结构拓扑优化设计, 不确定性结构分析与优化设计专题学术研讨会, 2021, 西安

周明东, 防隔热-承载结构多尺度拓扑优化, 结构轻量化设计与制造技术论坛, 2021, 西安

周明东, 防隔热-承载结构多尺度拓扑优化, 航天八院-先进点阵结构设计与制造技术研讨会, 2021, 上海

M. Zhou, Y. Liu, C. Wei, Y. Lu, Topology Optimization of Supports and Infills for Additive Manufacturing with Process Simulations and Geometric Constraints, 14th World Congress of Structural and Multidisciplinary Optimization, 2021.

Y. Liu, C. Wei, M. Zhou, Topology Optimization of Self-supporting Infills for Additive Manufacturing, 14th World Congress of Structural and Multidisciplinary Optimization, 2021.

Y. Lu, Y. Liu, M. Zhou, Concurrent Optimization of Shells and Self-supporting Infills for additive manufacturing, 14th World Congress of Structural and Multidisciplinary Optimization, 2021.

周明东, 创成式结构设计与增材制造, 上海宇航系统工程研究所“结构机构大讲堂”, 2019

刘义畅,周明东, 面向增材制造的支撑结构拓扑优化设计, 中国力学大会2019, 杭州

M. Zhou, On bridging structural topology optimization and additive manufacturing with process simulation and geometry constraints, 13th World Congress of Structural and Multidisciplinary Optimization, 2019, Beijing, China.

Y. Liu, M. Zhou, Thermal conductive support structure design for additive manufacturing by topology optimization, 13th World Congress of Structural and Multidisciplinary Optimization, 2019, Beijing, China.

C. Wei, Y. Liu, M. Zhou, Topology optimization of tree-like support structures for additive manufacturing by geometric constraint, 13th World Congress of Structural and Multidisciplinary Optimization, 2019, Beijing, China.

[Keynote Lecture] M. Zhou, et.al., Topology optimization of straight-channel cooling structures for efficient heat transfer and mechanical behaviors. 6th European Conference on Computational Mechanics, 2018，Glasgow, UK.

M. Zhou, X. Zhao, Topology optimization of channel cooling structures with simplified thermofluidic models, Asian Congress of Structural Multidisciplinary Optimization 2018, Dalian, China.

周明东, 刘义畅，面向金属增材制造的支撑结构拓扑优化，2018年全国固体力学学术会议，哈尔滨。

Y Liu, M. Zhou, Topology Optimization of Thermal Problems in Additive Manufacturing with Process Simulation, Asian Congress of Structural Multidisciplinary Optimization 2018, Dalian, China.

周明东, 基于单纯复形的结构拓扑形状优化及其应用，中国力学大会2017，北京。

M. Zhou, et al., Shape Optimization of Fully Stressed Design and Channel Flow Problems by Explicit Boundary Tracking, 12th World Congress of Structural and Multidisciplinary Optimisation 2017, Braunschweig, Germany.

C. Lundgaard, J. Alexandersen, C. Andreasen, M. Zhou and Ole Sigmund, Topology optimization for fluid-structure-interaction problems,12th World Congress of Structural and Multidisciplinary Optimisation 2017, Braunschweig, Germany.

C. S. Andreasen, J. Alexandersen, J.J. Asmussen, X. Zhao, M. Zhou and O. Sigmund, Simplified flow models for topology optimization of thermofluidic devices, (ECCOMAS) VII International Conference on Coupled Problems in Science and Engineering 2017, Rhodes Island, Greece.

M. Zhou, et al., Topology Optimization for Manufacturing with Optical Microlithography, European Congress on Computational Methods in Applied Sciences and Engineering 2016, Crete, Greece.

M. Zhou, et al., Topology Optimization of Thermal Convective Problems, 2nd KAIST-DTU-DLUT Workshop on Design Optimization 2015, Daejeon, South Korea.

M. Zhou, et al., Industrial Applications of topology Optimization on Combined Thermal Conductive and Convective Problems, LaSciSO Project Final Meeting 2015, Sofia, Bulgaria.

M. Zhou, B. S. Lazarov, F. Wang and O. Sigmund, Minimum length scale in topology optimization by geometric constraints, In Proc. of 11th World Congress on Structural and Multidisciplinary Optimisation 2015, Sydney, Australia.

M. Zhou, et al., Topology Optimization for Optical Projection Lithography with Manufacturing Uncertainties, OPTI-I 2014, Kos, Greece.

M. Zhou, M.Y. Wang, and L.Li. Structural optimization using adaptive level set method. In Proc. of ASME/ISCIE 2012 International Symposium on Flexible Automation (ISFA2012), St. Louis, USA.